LBCarCo stock the following parts for the MGA Engine. Click on the part for pricing and ordering information.
Cylinder Head
- CYLINDER HEAD, W/VALVES, NEW
- GASKET SET
- GASKET, CYLINDER HEAD
- NUT, 3/8 UNF, G5, HIGH NUT
- WASHER, FLAT, 3/8, THICK
- STUD, 5/16 UNF X 1 5/8
- STUD, MANIFOLD, 1 7/8
- CAP, OIL FILLER, VENTED
- CAP, OIL FILLER, VENTED,CHROME
- GASKET, VALVE COVER
- CAP NUT, VALVE COVER
- NUT, ROCKER COVER, CHROME
- BUSHING, VALVE COVER
- WASHER, CUPPED, VALVE COVER
- WASHER, CUP, CHROME
- DISTANCE PIECE
- BRACKET, ENGINE SLING
- GASKET, MANIFOLD
- PLUG A57
- HOUSING, THERMOSTAT
- GASKET, THERMOSTAT HOUSING
- THERMOSTAT, 165F, 74C
- THERMOSTAT, 180F, 82C
- THERMOSTAT, 192F, 89C
- SLEEVE, THERMOSTAT BLANKING
- STUD, 5/16 UNF, THERM HOUSING
- NUT, 5/16 UNF, ZINC
- WASHER, LOCK, 5/16 IN
- PLATE A56A
- SCREW,TAPPET ADJUSTER
- NUT, JAM, 5/16 UNF
- ROCKER ARM, W/ BUSH & ADJUSTER
- BUSH, ROCKER ARM
- ROCKER SHAFT
- PLUG, ROCKER SHAFT
- WASHER
- SPRING
- BRACKET, RECONDITIONED
- PEDESTAL, ROCKER SHAFT
- SCREW
- LOCKPLATE, ROCKER PEDESTAL
- NUT, 5/16 UNF, ZINC
- COTTERS, VALVE, SET OF 2
- CLIP
- VALVE SEAL SET
- VALVE RETAINER
- DEFLECTOR, OIL (OVER VALVE )
- SPRING SET
- COLLAR
- VALVE, INTAKE, 1.5 IN DIA
- VALVE, INTAKE, 1.563 IN DIA
- VALVE, EXHAUST
- VALVE, EXHAUST, STELLITE
- VALVE, EXHAUST
- VALVE, EXHAUST, STELLITE
- VALVE GUIDE, INTAKE
- VALVE GUIDE, INTAKE, MANG/BRNZ
- VALVE GUIDE, EXHAUST
- VALVE GUIDE, EXHAUST,MANG/BRNZ
- STUD, ROCKER BRACKET, SHORT
- STUD, ROCKER BRACKET, LONG
- PLATE, VALVE COVER, W/MG
- PLATE,VALVE COVER, PATENT INFO
- RIVET
Engine Controls
- PAD, GAS PEDAL
- CABLE, CHOKE, KNOB W/ C
- CABLE, THROTTLE
- BRACKET, ACCELERATOR SPRING
- BRACKET
- CABLE ANCHOR
- SPRING ENGINE CONTROL
- GUIDE, THROTTLE CABLE
- SCREW, 10-32 X 7/16,PHIL, ZINC
- TRUNNION, THROTTLE CABLE
- STOP ASSY,CABLE,W/NUT & WASHER
- BRACKET, SPRING
- SPRING
- SPACER TUBE, ACCEL STOP
- CABLE, STARTER, KNOB W/ S
- COUPLER, STARTER CABLE
External Engine
- PAINT, DARK RED, SPRAY CAN
- PLUG
- PLUG
- PLUG
- WASHER, COPPER
- PLUG
- PLUG
- PLUG
- SEAL, MAIN BEARING CAP
- STUD, CYLINDER HEAD, 6.25 IN
- STUD, CYLINDER HEAD, 4.5 IN
- NUT, 3/8 UNF, G5, HIGH NUT
- WASHER, FLAT, 3/8, THICK
- PIN A18
- UNION, OIL GAUGE PIPE
- WASHER, COPPER
- WATER DRAIN TAP
- WASHER, FIBER, DRAIN TAP
- DIPSTICK STRAIGHT
- DIPSTICK
- TUBE, DIPSTICK
- BOOT, DIPSTICK
- COVER, TAPPET INSPECTION
- GASKET, SIDE COVER, CORK
- BOLT, 5/16 UNF X 1 3/4
- WASHER, FIBER, 5/16 ID
- PIPE, CRANKCASE BREATHER
- BLANKING PLATE
- VALVE, OIL PRESSURE RELIEF
- SPRING, OIL PRESSURE RELIEF
- CAP NUT
- WASHER, FIBER
- GASKET, PAN
- PLUG, OIL/FUEL DRAIN
- WASHER, COPPER
- WASHER, LOCK, 1/4 IN
- GASKET, FRONT ENGINE PLATE
- BOLT, 5/16 UNF X 3/4
- BRACKET RH ENG MONT GT
- BRACKET
- MOUNT, ENGINE, R/H
- MOUNT, ENGINE, R/H
- MOUNT, ENGINE, L/H
- GASKET, REAR PLATE
- BOLT, 3/8 UNF X 3/4
- BOLT, 5/16 UNF X 3/4
- WASHER, LOCK, 5/16 IN
- PILLAR, GEN ADJUSTING LINK
- WASHER, LOCK, 3/8 IN
- NUT, HEX, 3/8 UNF, G5, ZINC
- WASHER, FLAT, 3/8 ID, ZINC
- WASHER, LOCK, 3/8 IN
- NUT, NYLOC, 3/8 UNF
- LINK, GEN/ALT ADJUSTING
- WASHER, LOCK, 5/16 IN
- BOLT, 5/16 UNC
- BOLT W/ NUT SET
- RIVET, DRIVE, ENGINE NO. PLATE
- OIL SEAL A156
- OIL SEAL, TIMING COVER
- GASKET TIMING COVER
- GASKET, TIMING COVER
- SCREW/WASHER SET, TIMING COVER
- SET SCREW, HEX, 1/4 UNF X 3/4
- WASHER, FLAT, OVAL, 1/4 IN
- BOLT, 5/16 UNF X 3/4
- WASHER, FLAT, OVAL, 5/16 IN
- CABLE, TO GROUND
- PULLEY, CRANKSHAFT
- NUT, CRANK DOG
- LOCKTAB WASHER, CRANK DOG NUT
- GASKET, TACH DRIVE HOUSING
- HOUSING, TACH DRIVE PINION
- SEAL, TACH DRIVE
- GASKET SET
- GASKET SET, LOWER ENGINE
Internal Engine
- CRANKSHAFT, NEW
- BUSHING, SPIGOT, 5/8 IN ID
- SPROCKET, CRANKSHAFT
- KEY, WOODRUFF, CRANK
- OIL THROWER
- SHIM, .006
- BEARING SET, MAIN, STD
- BEARING SET, MAIN, .010
- BEARING SET, MAIN, .020
- BEARING SET, MAIN, .030
- BEARING SET, MAIN, .040
- BEARING SET, MAIN, STD
- BEARING SET, MAIN, .010
- BEARING SET, MAIN, .020
- BEARING SET, MAIN, .030
- BEARING SET, MAIN, .040
- THRUST WASHER SET
- THRUST WASHER SET
- THRUST WASHER SET
- CONNECTING ROD
- BOLT, CONNECTING ROD
- LOCK PLATE, CON ROD BOLTS
- BOLT B15
- BOLT
- WASHER, LOCK, 5/16 IN
- BEARING SET, CON ROD, STD
- BEARING SET, CON ROD, .010
- BEARING SET, CON ROD, .020
- BEARING SET, CON ROD, .030
- BEARING SET, CON ROD, .040
- PISTON SET
- PISTON SET, .020
- PISTON SET, .030
- PISTON SET, .040
- PISTON SET, .060
- PISTON SET, STD
- PISTON SET, .020
- PISTON SET, .030
- PISTON SET, .040
- PISTON SET, .060
- PISTON SET, .020
- PISTON SET, .030
- PISTON SET, .040
- PISTON RING SET, STD
- PISTON RING SET, .020
- PISTON RING SET, .030
- PISTON RING SET, .040
- PISTON RING SET, .060
- PISTON RING SET, STD
- PISTON RING SET, .020
- PISTON RING SET, .030
- PISTON RING SET, .040
- PISTON RING SET, .060
- PISTON RING SET, STD
- PISTON RING SET, .020
- PISTON RING SET, .030
- PISTON RING SET, .040
- PISTON RING SET, .060
- PISTON RING SET, STD
- PISTON RING SET, .020
- PISTON RING SET, .030
- PISTON RING SET, .040
- LINER
- LINER
- LINER
- CAMSHAFT, STOCK PROFILE
- CAMSHAFT, HIGH PERFORMANCE
- BEARING SET, CAMSHAFT
- KEY, WOODRUFF
- THRUST PLATE, CAM
- NUT
- SPROCKET, CAM
- TIMING CHAIN, DOUBLE ROW
- TENSIONER, TIMING CHAIN
- GASKET, TIMING CHAIN TENSIONER
- BOLT
- GEAR,TACH DRIVE
- KEY, WOODRUFF
- CLIP
- SCREW, 1/2 IN
- SET SCREW, HEX, 1/4 UNF X 3/4
- TAPPET AND PUSHROD SET
- TAPPET
- PUSHROD
- RING GEAR
- PIN
- NUT, HEX, 3/8 UNF, G5, ZINC
- BOLT, FLYWHEEL TO CRANKSHAFT
- STUD, MAIN BEARING CAP
- NUT, MAIN BEARING CAP
- STUD A17
- SPINDLE, OIL PUMP DRIVE
- GASKET, OIL PUMP TO BLOCK
- OIL PUMP
- GASKET, OIL STRAINER TO PUMP
- STRAINER
- LOCK PLATE, CON ROD BOLTS
- LOCKTAB, CAM SPROCKET NUT
- LOCK PLATE, CHAIN TENSIONER
- LOCKPLATE, FLYWHEEL BOLTS
Air Filters/Manifolds
- HOSE, 4 X 18 INCHES
- P-CLIP, 4 IN AIR DUCT SUPPORT
- FILTER, AIR, HELLINGS, 1 1/2inch
- FILTER ASSY, FRONT, OE TYPE
- FILTER, AIR, REAR
- BOLT, 5/16 UNF X 3/4
- ELEMENT, AIR FILTER
- SEAL SET, FELT, AIR FILTER
- BRACKET, ACCELERATOR SPRING
- GASKET, CARB TO AIR FILTER
- HEAT SHIELD, CARB
- CLIP, CARB OVERFLOW PIPE
- STUD, CARB TO MANIFOLD
- NUT, HEX, 3/8 UNF, G5, ZINC
- WASHER, LOCK, 3/8 IN
- STUD, ACCELERATOR BRACKET
- NUT, JAM, 3/8 UNF, ZINC
- WASHER, LOCK, 5/16 IN
- PLATE, INFORMATION, INT MANIFD
- INFO PLATE INT MANIF
- GASKET, MANIFOLD
- INSULATOR, CARB TO MANIFOLD
- GASKET, CARB TO MANIFOLD
- HOSE, BREATHER
- CLAMP, HOSE
Oil Coolers and Hoses
- HOSE, OIL
- OIL COOLER, 13 ROW
- ADAPTOR UNION, OIL LINE
- WASHER, COPPER
- OIL COOLER KIT,W/13 ROW COOLER
- HOSE, OIL,45.5 IN, 45/90
- HOSE, OIL, 26 IN, 45/90
- OIL COOLER, 13 ROW
- HOSE, OIL S/S, 26 IN, 45/90
- HOSE, OIL S/S, 39.5 IN, 45/90
- HOSE, OIL S/S, 45.5 IN, 45/90
- HOSE, OIL S/S, 47.5 IN, 45/0
- SHROUD, OIL COOLER
Oil System
- HOSE, OIL
- OIL COOLER, 13 ROW
- ADAPTOR UNION, OIL LINE
- WASHER, COPPER
- OIL COOLER KIT,W/13 ROW COOLER
- HOSE, OIL,45.5 IN, 45/90
- HOSE, OIL, 26 IN, 45/90
- OIL COOLER, 13 ROW
- HOSE, OIL S/S, 26 IN, 45/90
- HOSE, OIL S/S, 39.5 IN, 45/90
- HOSE, OIL S/S, 45.5 IN, 45/90
- HOSE, OIL S/S, 47.5 IN, 45/0
- SHROUD, OIL COOLER
We at Little British Car Co and Vintage Motors are dedicated to providing excellent customer service with a "Personal Touch" and quality classic car parts and accessories always at a "substantially lower" price.
|
