LBCarCo stock the following parts for the MGA Steering/Suspension. Click on the part for pricing and ordering information.
Front Suspension
- SUSPENSION KIT, MAJOR, OE BUSH
- MAJOR SUSPENSION KIT, BV8 BUSH
- RUBBER SET, FRONT SUSPENSION
- SHOCK, LEVER, FRONT
- SHOCK, LEVER, FRONT, REBUILT
- NUT, HEX, 3/8 UNF, G5, ZINC
- WASHER, LOCK, 3/8 IN
- STUD
- BOLT SET, 3/8 UNC, SHOCK MOUNT
- LINK, SUSPENSION, TOP, R/H
- LINK, SUSPENSION, TOP, L/H
- LINK, R/H BOTTOM SUSPENSION
- L/H BOT SUSP LINK
- PLUG
- BUSHING, LOWER TRUNNION
- GREASE NIPPLE, 45 DEGREE
- BOLT, NUT & LOCKWASHER,1/2 IN
- BOLT, NUT, & LOCKWASHER, 1/2
- NUT, 1/2 UNF, CASTLE
- WASHER, LOCK, 1/2 IN, SQ CX
- SEAL SET, 4 PIN + 8 LINK SEALS
- SEAL SUPPORT, SUSPENSION LINK
- WASHER, THRUST
- DISTANCE TUBE
- SWIVEL PIN R/H
- SWIVEL PIN L/H
- KEY, WOODRUFF
- NUT, NYLOCK, 1/2 UNF
- NUT, NYLOCK, 5/8 UNF, G5
- WASHER
- BOLT, BRAKE BACK PLATE
- BOLT, 3/8 UNF
- WASHER, LOCK, 3/8 IN
- NUT, HEX, 3/8 UNF, G5, ZINC
- SPACER, OIL SEAL
- OIL SEAL, FRONT HUB
- BEARING, INNER HUB
- SPACER
- BEARING, OUTER HUB
- WASHER
- NUT, SLOTTED, 3/4 16TPI RHT
- NUT, SLOTTED, 3/4 16TPI LHT
- DUST CAP, FRONT WHEEL HUB
- STUD
- BOLT, ROTOR TO HUB
- WASHER, LOCK, 3/8 IN
- NUT, 3/8 UNF, ZINC
- NUT G20 K39
- HUB, WIRE WHEEL, FRONT, R/H
- HUB, WIRE WHEEL, FRONT, L/H
- STUD, W/WHEEL HUB
- TAB WASHER, BRAKE DRUM
- NUT SET, 3/8 UNF
- HUB, WIRE WHEEL, FRONT, R/H
- HUB, WIRE WHEEL, FRONT, L/H
- BOLT, ROTOR TO HUB
- WASHER, LOCK, 3/8 IN
- NUT, 3/8 UNF, ZINC
- GREASE RETAINER
- WHEEL NUT, MG CREST,12TPI, R/H
- WHEEL NUT, MG CREST,12TPI, L/H
- COIL SPRING, FRONT
- BUFFER
- SPACER FR REBOUND RUBBER
- WASHER, LOCK, 5/16 IN
- NUT, 5/16 UNF, ZINC
- PIVOT, LOWER CONTROL ARMS
- BOLT, 3/8 UNF X 1 1/4, G8
- WASHER, FLAT, 3/8 ID
- WASHER, LOCK, 3/8 IN
- NUT, NYLOC, 3/8 UNF
- BUSHING SET, LOWER ARM, INNER
- BUSH SET, FRONT SUSPENSION,V8
- WASHER
- NUT, SLOTTED, 1/2 UNF,G5, ZINC
- SPRING PAN
- ARM, REAR
- BOLT SET, SPRING PAN TO ARM
- SWAY BAR KIT
- BUSH, SWAY BAR MOUNT
Steering
- RACK & PINION ASS'Y
- SEAL, STEERING PINION SHAFT
- RACK DAMPENING PAD
- SHIM, STEERING RACK, .003
- PAD
- WASHER
- BALL HOUSING, MALE, TIE ROD
- BALL HOUSING, TIE ROD
- NUT, JAM, 5/8 UNF, G5, ZINC
- WASHER,LOCK,MALE BALL HOUSING
- SHIM, TAIL BEARING .005
- SHIM, TAIL BEARING .007
- BOLT, 5/16 UNF X 3/4
- SEAL, STEERING RACK
- CLAMP,HOSE,BAND TYPE,1.69-1.87
- CLAMP, HOSE, BAND TYPE .68-.76
- TIE ROD END, PAIR
- BOOT, TIE ROD END
- CLIP, TIE ROD END BOOT
- WASHER, FLAT, 3/8 ID, ZINC
- NUT, NYLOCK, 7/16 UNF
- GREASE NIPPLE, 45 DEGREE
- GREASE NIPPLE, 45 DEGREE
- SHIM, STEERING RACK MOUNT
- BOLT SET F38 F40
- STRG COL U-JOINT ASSY
- U-JOINT, STEERING, AFTERMARKET
- BOLT W/ NUT SET
- WHEEL, STEERING
- STEERING WHEEL, WOODRIM
- STEERING WHEEL, BROOKLANDS
- CENTERPIECE, STEERING WHEEL
- CLIP FOR CENTERPIECE
- NUT
- CLAMP, STEERING COLUMN
- DISTANCE PIECE
- BOLT W/ NUT
- SEAL, STEERING COLUMN
- BUSH, FELT, STRG COLUMN, UPPER
- BUSH, FELT, STRG COLUMN, UPPER
- BUSH, FELT, STRG COLUMN, LOWER
- SHAFT
- KEY STEERING COLUMN
- CLAMP, STEERING COLUMN
- STEERING SPRING COVER
- CAP
We at Little British Car Co and Vintage Motors are dedicated to providing excellent customer service with a "Personal Touch" and quality classic car parts and accessories always at a "substantially lower" price.
|
