LBCarCo stock the following parts for the MGC Engine. Click on the part for pricing and ordering information.
MGB Cylinder Head
- HOUSING, THERMOSTAT
- HOUSING, THERMOSTAT
- THERM HOUSING OUTLET
- HOUSING, THERMOSTAT
- PLUG, T-STAT HOUSING, NYLON
- PLUG, THERMO HOUSING, BRASS
- GASKET, OUTLET PLUG,T-STAT HSG
- STUD, 5/16 UNF, THERM HOUSING
- GASKET, THERMOSTAT HOUSING
- THERMOSTAT, 180F, 82C
- THERMOSTAT, 165F, 74C
- THERMOSTAT, 192F, 89C
- SENDING UNIT WATER TEMP
- SENDING UNIT WATER TEMP
- PLATE, VALVE COVER, W/MG
- DECAL, VALVE COVER, W/MG
- PLATE,VALVE COVER, PATENT INFO
- INSTRUCTION PLATE
- DECAL, VALVE COVER, BL
- RIVET
- RIVET, DRIVE, ENGINE NO. PLATE
- CYLINDER HEAD, W/VALVES, NEW
- PLUG A57
- TUBE, AIR INJECTION
- GASKET, CYLINDER HEAD, PAYEN, FEDERAL MOGUL OR CLOUGH & WOOD
- STUD, CYLINDER HEAD, 4.5 IN
- STUD, CYLINDER HEAD, 6.25 IN
- NUT, 3/8 UNF, G5, HIGH NUT
- WASHER, FLAT, 3/8, THICK
- VALVE COVER, W/O VENT
- VALVE COVER, W/O VENT
- CAP, OIL FILLER, VENTED
- CAP, OIL FILLER, VENTED, REPL
- CAP, OIL FILLER
- GASKET, VALVE COVER
- BRACKET, ENGINE SLING
- CAP NUT, VALVE COVER
- NUT, ROCKER COVER, CHROME
- CAP NUT, VALVE COVER
- DISTANCE PIECE
- WASHER, CUPPED, VALVE COVER
- WASHER, CUP, CHROME
- BUSHING, VALVE COVER
- VALVE, INTAKE, 1.563 IN DIA
- VALVE, INTAKE, 1.563 IN DIA
- VALVE, INTAKE, 1.625 IN DIA
- VALVE, EXHAUST
- VALVE, EXHAUST, STELLITE
- VALVE, EXHAUST
- VALVE, EXHAUST, STELLITE
- VALVE GUIDE, INTAKE
- VALVE GUIDE, INTAKE, MANG/BRNZ
- VALVE GUIDE, EXHAUST
- VALVE GUIDE, EXHAUST,MANG/BRNZ
- SPRING SET
- VALVE SPRING SET
- VALVE SPRING SET
- COLLAR
- COLLAR
- DEFLECTOR, OIL (OVER VALVE )
- VALVE RETAINER
- VALVE CUP
- VALVE CUP
- VALVE SEAL SET
- COTTERS, VALVE, SET OF 2
- VALVE COTTER
- CLIP
- SHIM, ROCKER PEDESTAL
- PEDESTAL, ROCKER SHAFT
- BRACKET, RECONDITIONED
- ROCKER BRACKET 18V
- STUD, ROCKER BRACKET, SHORT
- STUD, ROCKER BRACKET, LONG
- NUT, 5/16 UNF, ZINC
- LOCKPLATE, ROCKER PEDESTAL
- SCREW
- ROCKER SHAFT
- ROCKER SHAFT, TUFTRIDED
- PLUG, ROCKER SHAFT
- WASHER
- SPRING
- ROCKER ARM, W/ BUSH & ADJUSTER
- BUSH, ROCKER ARM
- SCREW,TAPPET ADJUSTER
- NUT, JAM, 5/16 UNF
- TAPPET AND PUSHROD SET
- PUSHROD
- PUSHROD
- TAPPET
- TAPPET, TAPPET, MIDGET -74, MGB 72-
- OUTLET, CYL HD TO AUTOCHOKE
- GASKET, WATER CHOKE OUTLET
MGB HS-4 Controls, 1962-71
- BUSHING, PEDAL
- PAD, GAS PEDAL
- TUBE, DISTANCE, GAS PEDAL
- WASHER, LOCK, 5/16 IN
- BOLT, 5/16 UNF X 1 3/8
- NUT, NYLOCK, 5/16 UNF
- PEDAL STOP
- SETSCREW, HEX, 1/4 UNF X 5/8
- WASHER, LOCK, 1/4 IN
- BOLT, HEX, 1/4 UNF X 1
- GUIDE, THROTTLE CABLE
- SCREW, 10-32 X 7/16,PHIL, ZINC
- CABLE, THROTTLE
- CABLE, THROTTLE
- LEVER, ACCELERATOR
- SPRING
- STOP ASSY,CABLE,W/NUT & WASHER
- WASHER, FLAT, 1/4 ID, 3/4 OD
- CABLE, CHOKE, ROUND KNOB, C
- CABLE, CHOKE,KNOB W/FAN SYMBOL
- CABLE, CHOKE
- GROMMET
- BRACKET, FRONT AIR FILTER
- SPRING
- ABUTMENT, CHOKE CABLE
- CABLE STOP
MGB HIF-4 Controls, 1972-74
- BUSHING, PEDAL
- TUBE, DISTANCE, GAS PEDAL
- WASHER, LOCK, 5/16 IN
- BOLT, 5/16 UNF X 1 3/8
- NUT, NYLOCK, 5/16 UNF
- PEDAL STOP
- SETSCREW, HEX, 1/4 UNF X 5/8
- WASHER, LOCK, 1/4 IN
- BOLT, HEX, 1/4 UNF X 1
- GUIDE, THROTTLE CABLE
- SCREW, 10-32 X 7/16,PHIL, ZINC
- CABLE, THROTTLE
- CABLE, THROTTLE
- SPRING
- STOP ASSY,CABLE,W/NUT & WASHER
- WASHER, FLAT, 1/4 ID, 3/4 OD
- CABLE, CHOKE, T-KNOB
- GROMMET
- SPRING
MGB Z-S Controls, 1975-80
- BUSHING, PEDAL
- TUBE, DISTANCE, GAS PEDAL
- WASHER, LOCK, 5/16 IN
- BOLT, 5/16 UNF X 1 3/8
- NUT, NYLOCK, 5/16 UNF
- PEDAL STOP
- SETSCREW, HEX, 1/4 UNF X 5/8
- WASHER, LOCK, 1/4 IN
- BOLT, HEX, 1/4 UNF X 1
- GUIDE, THROTTLE CABLE
- SCREW, 10-32 X 7/16,PHIL, ZINC
- CABLE, THROTTLE
- CABLE, THROTTLE
- SPRING
MGB External Engine
- PLUG
- WATER DRAIN TAP
- PLUG
- WASHER, FIBER, DRAIN TAP
- UNION, OIL GAUGE PIPE
- WASHER, COPPER
- OIL HOSE, STAINLESS STEEL
- COVER, TAPPET INSPECTION
- GASKET, SIDE COVER, CORK
- GASKET, SIDE COVER, RUBBER
- WASHER, FIBER
- WASHER, COPPER, 5/16inch ID
- WASHER, FLAT, 5/16 IN
- BUSHING, TAPPET COVER
- WASHER, CUP, SIDE COVER
- PIPE, CRANKCASE BREATHER
- GASKET, CYLINDER HEAD, PAYEN, FEDERAL MOGUL OR CLOUGH & WOOD
- PLUG
- WASHER, COPPER
- WASHER FOR OIL PLUG
- CAP NUT
- WASHER, FIBER
- SPRING, OIL PRESSURE RELIEF
- VALVE, OIL PRESSURE RELIEF
- PACKING, RELIEF VALVE
- BLANKING PLATE, FUEL PUMP
- GASKET, FUEL PUMP
- STUD, CYLINDER HEAD, 4.5 IN
- STUD, CYLINDER HEAD, 6.25 IN
- NUT, 3/8 UNF, G5, HIGH NUT
- BOLT, CRANK PULLEY TO CRANK
- LOCKTAB WASHER, CRANK DOG NUT
- OIL SEAL, TIMING COVER
- SEAL, REAR CRANK
- RETAINER, OIL SEAL
- SCREW/WASHER SET, TIMING COVER
- SCREW SET, TIMING COVER
- SETSCREW, HEX, 1/4 UNF X 5/8
- SET SCREW, HEX, 1/4 UNF X 3/4
- BOLT, 5/16 UNF X 3/4
- WASHER, LOCK, 1/4, STD G8
- WASHER, LOCK, 5/16 IN
- WASHER, FLAT, OVAL, 1/4 IN
- WASHER, FLAT, OVAL, 5/16 IN
- GASKET, TIMING COVER
- GASKET, PAN
- GASKET, PAN
- PLUG, OIL/FUEL DRAIN
- PLUG, OIL DRAIN, MAGNETIC
- WASHER, COPPER
- FITTING KIT, OIL SUMP
- BOLT, HEX, 1/4 UNF X 1/2, G5
- WASHER, INT TOOTH, 1/4 ID
- WASHER, FLAT,1/4 IN
- GASKET SET, LOWER
- GASKET SET, LOWER
- SEAL, MAIN BEARING CAP
- SEAL, MAIN BRG CAP
- GASKET, FRONT ENGINE PLATE
- PLUG
- LINK, GEN/ALT ADJUSTING
- LINK, GEN/ALT ADJUSTING
- LINK ALTERNATOR ADJ
- PILLAR, GEN ADJUSTING LINK
- BRACKET, ALTERNATOR
- DIPSTICK
- DIPSTICK
- DIPSTICK
- BOOT, DIPSTICK
- TUBE, DIPSTICK
- TUBE, DIPSTICK
- GASKET, REAR PLATE
- PLUG, ENGINE BEARER PLATE
- HOUSING, TACH DRIVE PINION
- SEAL, TACH DRIVE
- GASKET, TACH DRIVE HOUSING
- MOUNT, ENGINE, L/H
- MOUNT, ENGINE, R/H
- ENGINE MOUNT, 3/8 UNF STUD
- MOUNT, ENGINE, H-DUTY
- MOUNT, REAR GEARBOX
- TRANS MOUNT
- BRACKET
- BRACKET RH ENG MONT GT
- BRACKET, L/H ENGINE MOUNT
- BRACKET, R/H ENGINE MOUNT
- BRACKET
- BUFFER, STAY ROD
- BUSHING
- BUSH, REAR GEARBOX
MGB Internal Engine
- BUSHING, SPIGOT, 5/8 IN ID
- BUSHING, SPIGOT, 1.5 IN LONG
- BUSHING, SPIGOT, 1 IN LONG
- BUSHING, SPIGOT, 1.5 IN LONG
- SEAL, REAR CRANK
- PEG, FLYWHEEL TO CRANKSHAFT
- BOLT, CRANK PULLEY TO CRANK
- LOCKTAB WASHER, CRANK DOG NUT
- OIL THROWER
- SPROCKET, CRANKSHAFT
- SPROCKET CRANK
- KEY, WOODRUFF, CRANK
- KEY, WOODRUFF, CRANKSHAFT
- SHIM, .006
- CONNECTING ROD
- BOLT, CONNECTING ROD
- BOLT
- CONNECTING ROD
- BOLT, CONNECTING ROD
- LOCK PLATE, CON ROD BOLTS
- CONNECTING ROD, REBUILT
- CONNECTING ROD, REBUILT
- BOLT, CONNECTING ROD
- NUT, CONNECTING ROD BOLT
- BEARING SET, MAIN, STD
- BEARING SET, MAIN, .010
- BEARING SET, MAIN, .020
- BEARING SET, MAIN, .030
- BEARING SET, MAIN, .040
- BEARING SET, MAIN, STD
- BEARING SET, MAIN, .010
- BEARING SET, MAIN, .020
- BEARING SET, MAIN, .030
- BEARING SET, MAIN, .040
- BEARING SET, CON ROD, STD
- BEARING SET, CON ROD, .010
- BEARING SET, CON ROD, .020
- BEARING SET, CON ROD, .030
- BEARING SET, CON ROD, .040
- BEARING SET, CON ROD, STD
- BEARING SET, CON ROD, .010
- BEARING SET, CON ROD, .020
- BEARING SET, CON ROD, .030
- BEARING SET, CON ROD, .040
- BUSHING SET, WRIST PIN
- THRUST WASHER SET
- THRUST WASHER SET, .005
- CAMSHAFT, STOCK PROFILE
- CAMSHAFT
- CAMSHAFT
- KEY, WOODRUFF
- BEARING SET, CAMSHAFT
- THRUST PLATE, CAM
- TIMING CHAIN, DOUBLE ROW
- TIMING CHAIN
- SPROCKET, CAM
- SPROCKET CAM
- LOCKTAB, CAM SPROCKET NUT
- NUT
- TENSIONER, TIMING CHAIN
- GASKET, TIMING CHAIN TENSIONER
- LOCK PLATE, CHAIN TENSIONER
- GEAR,TACH DRIVE
- CLIP
- SCREW, 1/2 IN
- PISTON SET, STD
- PISTON SET, .020
- PISTON SET, .030
- PISTON SET, .040
- PISTON SET, .020
- PISTON SET, .020
- PISTON SET, .030
- PISTON SET, .040
- PISTON SET, STD
- PISTON SET, .020
- PISTON SET, .030
- PISTON SET, .040
- PISTON SET, 8.7:1, STD
- PISTON SET, 8.7:1, .020
- PISTON SET .030 8.7:1
- PISTON SET .040 8.7:1
- PISTON SET, 8.7:1, .060
- PISTON RING SET, STD
- PISTON RING SET, .020
- PISTON RING SET, .030
- PISTON RING SET, .040
- PISTON RING SET, STD
- PISTON RING SET, .020
- PISTON RING SET, .030
- PISTON RING SET, .040
- PISTON RING SET, STD
- PISTON RING SET, .020
- PISTON RING SET, .030
- PISTON RING SET, .040
- FLYWHEEL ASSY
- RING GEAR
- RING GEAR
- PIN
- LOCKPLATE, FLYWHEEL BOLTS
- LOCKPLATE, FLYWHEEL BOLTS
- BOLT, FLYWHEEL TO CRANKSHAFT
- BOLT, FLYWHEEL TO CRANKSHAFT
- NUT, HEX, 3/8 UNF, G5, ZINC
- TAPPET AND PUSHROD SET
- PUSHROD
- PUSHROD
- TAPPET
- TAPPET, TAPPET, MIDGET -74, MGB 72-
- OIL PUMP
- OIL PUMP
- SPINDLE, OIL PUMP DRIVE
- STRAINER
- GASKET, OIL PUMP TO BLOCK
- GASKET, OIL PUMP TO BLOCK
- GASKET, OIL STRAINER TO PUMP
- NUT, MAIN BEARING CAP
- BOLT, MAIN BEARING CAP
- CYLINDER LINER
- LOCK TAB SET, ENGINE
MGB HS-4 Manifold, Air Cleaner
- STUD
- PLUG, END, INT. MANIFOLD
- PLUG
- WASHER, FIBER
- PLUG
- PLUG WASHER
- WASHER, MANIFOLDS TO HEAD
- NUT, HEX, 5/16 UNF, BRASS
- GASKET, MANIFOLD
- STUD, 5/16 UNF X 1 5/8
- STUD, MANIFOLD, 1 7/8
- STUD & NUT KIT, EX MANIFOLD
- STUD, MANIFOLD, 5/16 X 1 5/8
- NUT, HEX, 5/16 UNF, BRASS
- GASKET, EX FLANGE
- HEATSHIELD, HS CARBS
- GASKET, CARB MOUNT
- SPACER, CARB
- FILTER, AIR
- ELEMENT, AIR FILTER, K & N
- RUBBER SEAL
- BOLT, 5/16 UNF
- SPACER, AIR FILTER
- WASHER, FLAT, 5/16
- GROMMET
- HOSE, EMMISSIONS
- COUPLING SLEEVE, SU AIRFILTER
- BRACKET, FRONT AIR FILTER
- BRACKET, REAR AIR FILTER
- GASKET, CARB TO AIR FILTER
- DECAL, AIR FILTER
- ADAPTOR, AIR FILTER, 1 1/2 IN
- CLAMP, HOSE
MGB HIF-4 Manifold, Air Cleaner
- STUD
- PLUG, END, INT. MANIFOLD
- PLUG
- WASHER, FIBER
- PLUG
- PLUG WASHER
- WASHER, MANIFOLDS TO HEAD
- NUT, HEX, 5/16 UNF, BRASS
- GASKET, MANIFOLD
- STUD, 5/16 UNF X 1 5/8
- STUD, MANIFOLD, 1 7/8
- STUD & NUT KIT, EX MANIFOLD
- STUD, MANIFOLD, 5/16 X 1 5/8
- NUT, HEX, 5/16 UNF, BRASS
- GASKET, EX FLANGE
- HEATSHIELD, HIF CARBS
- GASKET, CARB MOUNT
- SPACER, CARB
- FILTER, AIR
- ELEMENT, AIR FILTER, K & N
- RUBBER SEAL
- BOLT, AIR FILTERS, COARSE
- SPACER, AIR FILTER
- WASHER, FLAT, 5/16
- GROMMET
- COUPLING SLEEVE, SU AIRFILTER
- GASKET, CARB TO AIR FILTER
- DECAL, AIR FILTER
- ADAPTOR, AIR FILTER, 1 1/2 IN
MGB Z-S Manifold, Air Cleaner
- GASKET, MANIFOLD
- NON-RETURN VALVE
- WASHER ADAPTOR, COPPER
- PLUG
- WASHER, FIBER
- STUD, 5/16 UNF X 1 5/8
- WASHER, MANIFOLDS TO HEAD
- WASHER, FLAT, 5/16 IN
- NUT, HEX, 5/16 UNF, BRASS
- STUD 5/16 IN X 2 IN
- GASKET, CARB MOUNT
- CATALYST, REPLACEMENT
- GASKET, CATALYST TO MANIFOLD
- STUD
- STUD, MANIFOLD TO CONVERTER
- NUT,SELF-LOCK,METAL, 5/16 UNF
- FILTER, AIR, STROMBERG
- DECAL, UNIPART AIR FILTER
- FIBRE WASHER
- WING NUT, ZS
- GROMMET
- GASKET, CARB TO AIR CLEANER
- TUBE REGLTR
- CLIP, FUEL PUMP SUPPORT
- HEATSHIELD, ZS CARBS
- SCREW
- WASHER, LOCK, #10
MGB Oil Coolers 1962 - 1967
- HOSE, OIL, 39.5 IN, 45/90
- HOSE, OIL,45.5 IN, 45/90
- HOSE, OIL, 26 IN, 45/90
- HOSE, OIL
- OIL COOLER, 13 ROW
- OIL COOLER, 10 ROW
- SETSCREW, HEX, 1/4 UNF X 5/8
- WASHER, LOCK, 1/4 IN
- WASHER, FLAT,1/4 IN
- STRAP ASSY, HOSE
- STRAP, RUBBER, OIL HOSE BRACE
- PLATE, HOSE BRACE
- SCREW, 10-32 X 7/8, PHIL, ZINC
- WASHER, LOCK, #10
- NUT, 10-32, G2, ZINC
- GROMMET, OIL HOSE
- ADAPTOR UNION, OIL LINE
- ADAPTOR, OIL PIPE TO BLOCK
- WASHER, COPPER
MGB Oil Cooler 1974 1/2 - 1980
- HOSE, OIL, 39.5 IN, 45/90
- HOSE, OIL,45.5 IN, 45/90
- HOSE, OIL, 26 IN, 45/90
- HOSE, OIL
- OIL COOLER, 13 ROW
- OIL COOLER, 10 ROW
- SETSCREW, HEX, 1/4 UNF X 5/8
- WASHER, LOCK, 1/4 IN
- WASHER, FLAT,1/4 IN
- STRAP ASSY, HOSE
- STRAP, RUBBER, OIL HOSE BRACE
- PLATE, HOSE BRACE
- SCREW, 10-32 X 7/8, PHIL, ZINC
- WASHER, LOCK, #10
- NUT, 10-32, G2, ZINC
- GROMMET, OIL HOSE
- ADAPTOR UNION, OIL LINE
- ADAPTOR, OIL PIPE TO BLOCK
- WASHER, COPPER
MGB Oil Cooler 1968 - 1974 1/2
- HOSE, OIL, 39.5 IN, 45/90
- HOSE, OIL,45.5 IN, 45/90
- HOSE, OIL, 26 IN, 45/90
- HOSE, OIL
- OIL COOLER, 13 ROW
- OIL COOLER, 10 ROW
- SETSCREW, HEX, 1/4 UNF X 5/8
- WASHER, LOCK, 1/4 IN
- WASHER, FLAT,1/4 IN
- STRAP ASSY, HOSE
- STRAP, RUBBER, OIL HOSE BRACE
- PLATE, HOSE BRACE
- SCREW, 10-32 X 7/8, PHIL, ZINC
- WASHER, LOCK, #10
- NUT, 10-32, G2, ZINC
- GROMMET, OIL HOSE
- ADAPTOR UNION, OIL LINE
- ADAPTOR, OIL PIPE TO BLOCK
- WASHER, COPPER
MGB Hanging Cannister
MGB Inverted Cannister
- DECAL, TECALEMIT CANNISTER
- SEAL, OIL CANNISTER
- CLIP
- PLATE, OIL FILTER CANNISTER
- WASHER, FELT, FOR FILTER
- STEEL WASHER
- SPRING TEC
- BOLT, OIL FILTER HEAD
- WASHER, COPPER, 3/4 OD, 1/2 ID
- PLUG
- BOLT, OIL FILTER CANNISTER
- SEAL FILTER BOLT
- SEAL, OIL CANNISTER
- HOSE, OIL
- ADAPTOR UNION, OIL LINE
- WASHER, COPPER
MGB Spin-On filter
- FILTER, OIL, SPIN ON, MGB 70- , MGA, SPT (COMPARABLE TO AND AS GOOD AS 950-000 OR 950-500)
- FILTER, OIL, SPIN-ON, HVY DUTY
- HEAD, INVERTED OIL FILTER
- SEAL, OIL CANNISTER
- BOLT, OIL FILTER HEAD
- WASHER, COPPER, 3/4 OD, 1/2 ID
- FILTER ,SPIN-ON
- SEAL, OIL CANNISTER
We at Little British Car Co and Vintage Motors are dedicated to providing excellent customer service with a "Personal Touch" and quality classic car parts and accessories always at a "substantially lower" price.
|
