LBCarCo stock the following parts for the MG TC TD TF 1500 GEARBOX/OVERDRIVE. Click on the part for pricing and ordering information.
TC Gearbox
- SHAFT REV TC
- SPRING
- WASHER, LOCK, 5/16, SQ CX
- BOLT SET, 6
- SPRING SET
- BALL SET
- LEVER, GEARSHIFT, 8 MM X 1
- LOCK NUT UNDER DOMENUT
- KNOB, SHIFT
- UPPER COVER SHIFTER
- SPRING
- RETAINER
- CIRCLIP, GEARSHIFT LEVER
- SPRING G/LEVER
- PIN GEARSHIFT LEVER RET.
- BALL, SYNCHRO HUB
- SPRING
- LEVER, REMOTE CONTROL
- WASHER, LOCK, #10
- KEY, WOODRUFF, 0.125IN WIDE
- CAP REMOTE DAMPER
- SPRING
- PLUNGER, REMOTE CONTROL
- BEARING, REAR MAINSHAFT
- REAR BEARING GUARD
- PLATE
- SPRING PLATE, GUARD
- BEARING SET,ROLLER, 1ST MOTION
- BEARING, GEARBOX
- PLATE
- WASHER, LOCK
- OIL SEAL
- BEARING SET, NEEDLE ROLLER, 30
- LAYSHAFT
- LOCK BOLT, GEARBOX
- WASHER, LOCK, 5/16, SQ CX
- FRT THRUSTWASHER ASSY
- RR THRUSTWASHER ASSY
- SPRING
- BALL SET, SLIDING HUB
- BEARING SET, NEEDLE ROLLER, 36
- SPRING T
- ROLLER BRG. SET,2ND GEAR
- SPRING
- BALL SET, SLIDING HUB
- LOCK BOLT, GEARBOX
- WASHER, LOCK, 5/16, SQ CX
- PLUG, OIL FILLER
- PLUG, OIL DRAIN , G-BOX
- WASHER, SEALING, COPPER
- WASHER
- NUT, MAINSHAFT FLANGE
- GEARBOX TAIL CASTING
- REAR MOUNT
- SETSCREW, HEX, 7/16 BSF X 1
- BOLT, 7/16 BSF X 2 IN
- NUT, STD. HEX, 7/16 BSF
- WASHER, LOCK, 5/16, SQ CX
- NUT, 8MM X 1
- NUT, HEX, 10MM X 1.5
- NUT, STD. HEX, 3/8 BSF, ZINC
- WASHER, LOCK, 3/8 IN
- WASHER, LOCK, 5/16, SQ CX
- GASKET SET, W/FRT SEAL,GEARBOX
- GASKET, GEARBOX
- GASKET, GEARBOX
TD-TF Gearbox
- SELECTOR SHAFT 1-2
- SHAFT, 3RD-4TH
- SHAFT, REVERSE
- SHAFT, REVERSE SELECTOR FORK
- WASHER, LOCK, 1/4 IN
- FORK, 1ST - 2ND SELECTOR
- RELEASE BEARING, CARBON FACE
- CLIP, OIL PUMP
- PLUNGER GEAR PLUNGER
- SPRING
- BALL, 5/16 IN DIA
- BOLT SET 8
- SPRING SET
- BALL SET
- LEVER, GEARSHIFT, 8 MM X 1
- KNOB, SHIFT
- LOCK NUT UNDER DOMENUT
- SPRING G/LEVER
- RETAINER
- CIRCLIP, GEARSHIFT LEVER
- PIN GEARSHIFT LEVER RET.
- BALL, SYNCHRO HUB
- SPRING
- LEVER, REMOTE CONTROL
- WASHER, LOCK, #10
- SHAFT, REMOTE CONTROL
- KEY, WOODRUFF, 0.125IN WIDE
- CAP REMOTE DAMPER
- SPRING
- PLUNGER, REMOTE CONTROL
- MAINSHAFT DISTANCE PIECE
- BEARING, REAR MAINSHAFT
- GUARD, REAR MAINSHAFT BEARING
- OIL SEAL
- BEARING, CENTER MAINSHAFT
- CIRCLIP, CENTER MAINSHAFT BRG
- WASHER, CENTER MAINSHAFT BRG
- CLIP
- PLATE
- SPRING PLATE, GUARD
- 1ST MOTION SHAFT
- BEARING SET, NEEDLE ROLLER, 18
- BEARING
- GUARD, 1ST MOTION SHFT BEARING
- WASHER, LOCK,1ST MOT SHAFT BRG
- LOCKNUT, INPUT SHAFT
- OIL SEAL, 1ST MOTION SHAFT
- CLUSTER GEAR
- BEARING SET, NEEDLE ROLLER, 28
- LAYSHAFT, GEARBOX
- LOCKBOLT, LAYSHAFT
- WASHER, LOCK, #10
- TUBE, LAY GEAR
- WASHER, ON LAYSHAFT
- THRUST WASHER, FRONT LAYGEAR
- FRONT PLATE, G-BOX
- THRUST WASHER, REAR LAYGEAR
- GEAR PLATE, GEARBOX
- STRIKING DOG, 3RD-4TH
- HUB, SLIDING 3RD & 4TH
- SPRING, 3RD-4TH SLIDING HUB
- BALL SET, SLIDING HUB
- 3RD GEAR
- BEARING SET, NEEDLE ROLLER, 32
- SECOND GEAR
- BEARING SET, NEEDLE ROLLER, 28
- KEEPER SET
- FIRST GEAR
- SPRING, 1ST & 2ND SLIDING HUB
- BALL SET, SLIDING HUB
- REVERSE GEAR
- WASHER, LOCK, 5/16, SQ CX
- PLUG, OIL FILLER
- PLUG, OIL DRAIN , G-BOX
- WASHER, SEALING, COPPER
- WASHER
- NUT, MAINSHAFT FLANGE
- KEY, WOODRUFF
- SCREW PINION HOUSING
- R MOUNT BRACKET
- MOUNT SET, GEARBOX
- FORK
- CLEVIS PIN, 5/16 X 13/16
- WASHER
- NUT, SLOTTED, 5/16 BSF
- BOLT
- WASHER, LOCK, 5/16, SQ CX
- WASHER, LOCK, 5/16, SQ CX
- NUT, 8MM X 1
- SWITCH, GEARBOX/OD
- GASKET SET, W/SEALS, GEARBOX
- GASKET, GEARBOX
- GASKET, GEARBOX
- GASKET, GEARBOX
We at Little British Car Co and Vintage Motors are dedicated to providing excellent customer service with a "Personal Touch" and quality classic car parts and accessories always at a "substantially lower" price.
|
