LBCarCo stocks the following parts for the TR2-TR4 BODY PANELS/STRUCTURE. Click on the part for pricing and ordering information.
Front Body Panels TR2-3B
- FENDER, R/H FRONT
- FENDER, L/H FRONT
- MOUNT KIT, FRONT FENDER
- REPAIR PANEL, R/H FRONT FENDER
- REPAIR PANEL, L/H FRONT FENDER
- BOLT, 1/4 UNF X 3/4, POINTED
- WASHER, FLAT, 1/4 ID, 3/4 OD
- BOLT, 1/4 UNF X 3/4, POINTED
- WASHER, FLAT, 1/4 ID, 3/4 OD
- BOLT, 1/4 UNF X 3/4, POINTED
- WASHER, FLAT, 1/4 ID, 3/4 OD
- BOLT, 1/4 UNF X 3/4, POINTED
- WASHER, FLAT, 1/4 ID, 3/4 OD
- BOLT, 1/4 UNF X 3/4, POINTED
- WASHER, FLAT, 1/4 ID, ZINC
- VALANCE, RH FT
- VALANCE, LH FT
- VALANCE, RH FRONT
- VALANCE, LH FRONT
- TAB WIRE HARNESS CLIP
- SPLASH GUARD
- RIVET, 1/8 DIA
- RETAINING STRIP
- SEAL, INNER FENDER
- SEAL, FRONT BAFFLE PLATE
- BOLT, 1/4 UNF X 3/4, POINTED
- WASHER, FLAT, 1/4 ID, 3/4 OD
- 454236-360-610
- APRON ASSY., FRONT
- FT APRON
- 454236-360-610
- BOLT
- BOLT, 1/4 UNF X 1 1/2
- WASHER, LOCK, INT TOOTH, 1/4
- NUT, HEX, 1/4 UNF, G5, ZINC
- NUT, SQUARE, 1/4 UNF
- CAGE FOR CAPTIVE NUT
- 454236-360-610
- BOX, BATTERY, STEEL
- DRAIN TUBE
- BATTERY TRAY
- PLATE, MASTER CYL BLANKING
- 454236-360-610
- VENT LID ASSY
- VENT LID
- SCUTTLE VENT SPRNG
- SCREW, 10-32 X 3/8, HEX HEAD
- WASHER, LOCK, #10, GR 5
- DRAIN TUBE VENT TRAY
Front Body Panels TR4-4A
- FRONT SPLASH APRON
- VALANCE UPPER FRONT
- VALANCE UPPER FRONT
- DUCT, AIR, FOR RADIATOR
- SCREW, 10 X 1/2 IN, POZI
- NUT, U-TYPE SPIRE
- LH STAY ROD
- RH STAY ROD
- HOOD ASSY TR4
- HOOD ASSY
- WHEEL ARCH, FRONT, R/H
- WHEEL ARCH, FRONT, L/H
- INNER FENDER, R/H
- INNER FENDER, L/H
- FENDER, R/H FRONT
- FENDER, L/H FRONT
- REPAIR PANEL, R/H FRONT FENDER
- REPAIR PANEL, L/H FRONT FENDER
- BEADING, FRONT FENDERS
- MOULDING, FRONT FENDER, L/H
- CLIP, W/RIVET, BODY MOULDING
- MOUNT KIT, FRONT FENDER
- BOLT, 1/4 UNF X 3/4, POINTED
- WASHER, LOCK, 1/4 IN
- WASHER, FLAT, #12
- BOLT, ACME THREAD
- WASHER, FLAT, #12
- SPIRE NUT, FENDER BOLT
- BOLT, 1/4 UNF X 3/4, POINTED
- WASHER, LOCK, 1/4 IN
- WASHER, FLAT, #12
- BOLT, 1/4 UNF X 3/4, POINTED
- WASHER, FLAT, #12
- SCREW
- SPIRE NUT, FENDER BOLT
- BAFFLE PLATE, L/H
- BAFFLE PLATE, R/H
- SEAL, FRONT BAFFLE PLATE
- DOOR, COWL VENT
- VENT SEALING RUBBER
- 454236-360-610
- HOSE, HEATER
- DOOR ASSY, R/H
- DOOR ASSY, L/H
- DOOR ASSY, R/H
- DOOR ASSY, L/H
- DOOR SKIN, R/H
- DOOR SKIN, L/H
- MOLDING, DOOR, L/H & R/H
- BARREL CLIP
- CLIP, W/RIVET, BODY MOULDING
Rear Body Panels TR4-4A
- COVER, GEARBOX, POLYETHELENE
- COVER PLATE GBX COVER
- PLUG, 2-1/8 HOLE, TRANS COVER
- SEAL SET, TRANS TUNNEL
- TUNNEL TO BULKHEAD SEAL
- SEAL, TUNNEL FLOOR
- SEAL, PROP TUNNEL
- FLOOR PANEL, R/H
- FLOOR PANEL, L/H
- PLUG, JACK HOLE
- SILL PANEL, INNER, L/H
- SILL PANEL, INNER, R/H
- SILL BRACKET FRONT
- SILL BRACKET FRONT
- SILL MOUNT L/R
- SILL BRACKET, R/H REAR
- OUTER SEAL RETAINER
- ROCKER PANEL, OUTER, L/H
- ROCKER PANEL, OUTER, R/H
- ROCKER PANEL END CAP R/F
- ROCKER PANEL END CAP L/F
- ROCKER PANEL END CAP L/R
- ROCKER PANEL END CAP R/R
- A-POST ASSY, INNER, R/H
- A-POST ASSY, INNER, L/H
- 454236-360-610
- 454236-360-610
- A-POST
- A-POST
- B-POST ASSY, L/H
- B-POST ASSY, R/H
- B-POST GUSSET
- REINFORCEMENT, B-POST
- BRACKET, LH GUSSET
- BRACKET, RH GUSSET
- ANCHOR, SEATBELT, L/H
- ANCHOR, SEATBELT, R/H
- 454236-360-610
- TUNNEL, DRIVESHAFT
- COVER D/SHAFT TUNNEL
- COVER D/SHAFT TUNNEL
- HEELBOARD
- FLOOR ASSY, REAR
- BRACKET LH
- BRACKET RH
- FLOOR, TRUNK
- FENDER, L/H REAR
- FENDER, R/H REAR
- REPAIR PANEL, R/H FRONT FENDER
- REPAIR PANEL, L/H FRONT FENDER
- WHEEL ARCH, REAR, R/H
- WHEEL ARCH, REAR, R/H
- WHEEL ARCH, L/H REAR
- WHEEL ARCH, REAR, L/H
- INNER FENDER, L/H REAR
- INNER FENDER, R/H REAR
- BEADING, UPPER REAR FENDER
- FENDER BEAD, R/H LOWER, REAR
- FENDER BEAD, L/H LOWER, REAR
- BEADING, FRONT FENDERS
- PANEL, FLOOR L/H TRUNK
- PANEL, FLOOR, R/H TRUNK
- BRACKET, TRUNK FLOOR
- POCKET, L/H TAIL LAMP
- POCKET, R/H TAIL LAMP
- 454236-360-610
- DECK SECTION R/H FT
- 454236-360-610
- DECK SECTION L/H FT
- 454236-360-610
- CTR R DECK
- NUT, RIVNUT TYPE 1/4-28
- TONNEAU, R/H
- TONNEAU, L/H
- TRUNK LID SHELL
- TRUNK REINFORCEMENT
- TRUNK REINFORCEMENT
- REAR VALANCE
- MOUNT KIT, REAR FENDER
- BOLT, ACME THREAD
- WASHER, FLAT, 1/4 ID, 3/4 OD
- WASHER, FLAT, 5/16 ID,17 MM OD
- SPIRE NUT, FENDER BOLT
- BOLT, 1/4 UNF X 3/4, POINTED
- WASHER, FLAT, 1/4 ID, 3/4 OD
- WASHER, LOCK, 1/4 IN
- KIT, GEARBOX COVER FITTING
- SET SCREW, HEX, 1/4 UNF X 3/4
- WASHER, FLAT, 1/4 ID, 3/4 OD
- PLATE, UNDER GBX COVER BOLT
- NUT & RETAINER
TR2-3B Rear Body Panels
- A-POST, R/H
- A-POST, L/H
- PANEL, B-POST, R/H
- PANEL, B-POST, L/H
- SILL ASSY, R/H
- SILL ASSY, L/H
- 454236-360-610
- 454236-360-610
- ROCKER PANEL, R/H
- ROCKER PANEL, L/H
- 454236-360-610
- 454236-360-610
- FENDER, R/H REAR
- FENDER, L/H REAR
- MOUNT KIT, REAR FENDER
- BOLT, 1/4 UNF X 3/4, POINTED
- SCREW, REAR FENDER MOUNT
- WASHER, FLAT, 1/4 ID, 3/4 OD
- BRACKET, REAR FENDER
- NUT, SQUARE, 1/4 UNF
- CAGE FOR CAPTIVE NUT
- CAGE(OBLONG) FOR CAPTIVE NUT
- QUARTER PANEL, L/H
- QUARTER PANEL, R/H
- INNER QTR PANEL R/H
- INNER QTR PANEL L/H
- 454236-360-610
- 454236-360-610
- WHEELARCH RH
- WHEELARCH, L/H
- WHEELARCH, R/H
- WHEELARCH, L/H
- 454236-360-610
- 454236-360-610
- TRUNK LINING, R/H
- TRUNK LINING, L/H
- 454236-360-610
- 454236-360-610
- STIFFENER R/H
- STIFFENER L/H
- FLOOR PANEL, R/H
- FLOOR PANEL, L/H
- REAR FLOOR PANEL
- FLOOR PANEL, REAR
- 454236-360-610
- PANEL, TONNEAU SADDLE
- PANEL, TONNEAU SADDLE
- TRUNK LID ASSY
- LID, TRUNK ASSY
- TRUNK LID ASSY
- TRUNK FLOOR PANEL
- TRUNK FLOOR LATE3A-3B
- PANEL, TRUNK REAR
- REAR TRUNK PANEL- TR3
- CLOSING PANEL,BOTTOM
- LID, SPARE TIRE
- PAN, SPARE TIRE
- PAN, SPARE TIRE
- CLOSING PANEL, R/H
- CLOSING PANEL, L/H
- CLOSING PANEL,LOWER
- BRACKET, R/H TRUNK PANEL
- BRACKET, L/H TRUNK PANEL
We at Little British Car Co and Vintage Motors are dedicated to providing excellent customer service with a "Personal Touch" and quality classic car parts and accessories always at a "substantially lower" price.
|
