LBCarCo stocks the following parts for the TR2-TR4 BODY TRIM. Click on the part for pricing and ordering information.
Door Seals TR4-4A
Doors TR2-3B
- DOOR SKIN, R/H
- DOOR SKIN, L/H
- DOOR SKIN, R/H
- DOOR SKIN, L/H
- DOOR SKIN, R/H
- DOOR SKIN L/H
- HINGE, DOOR, TOP, R/H
- HINGE, DOOR, TOP, L/H
- DOOR HINGE, TOP, R/H
- DOOR HINGE, TOP, L/H
- HINGE, DOOR, BOTTOM, R/H
- HINGE, DOOR, BOTTOM, L/H
- DOOR HINGE BOTTOM, R/H
- DOOR HINGE BOTTOM, L/H
- SCREW, DOOR HINGE
- DOOR CHECK
- FRONT SUPPORT BLOCK
- FRONT SUPPORT BLOCK
- DOOR TOP RAIL R/H
- DOOR TOP RAIL L/H
- REAR SUPPORT BLOCK TR
- REAR SUPPORT BLOCK TR
- RUBBER CORE, DOOR TOP TRIM,1IN
- DOOR TOP RAIL L/H
- DOOR TOP RAIL R/H
- END PLUG, CHROME
- 454236-360-610
- STUD, LIFT-THE-DOT, SCREW TYPE
- OUTER DOOR HANDLE
- FS SERIES KEY BLANK
- FP SERIES KEY BLANK
- FA SERIES KEY BLANK
- GASKET, DOOR & TRUNK HANDLE
- LATCH ASSY, R/H DOOR
- LATCH ASSY, L/H DOOR
- SCREW,LATCH & STRIKER PLATE
- STRIKER PLATE, DOOR LATCH
- PACKING STRIKER PLATE
- SCREW,LATCH & STRIKER PLATE
- DOOR SEAL
- CLIP, DOOR SEAL
- DOOR POCKET
- DOOR PULL, BLACK
- DOOR PULL, RED
- DOOR PULL, BLUE
- DOOR PULL, TAN
- DOOR PULL, GREY
- DOOR PULL, STONE
- CABLE, DOOR PULL
- CABLE, DOOR PULL
- FINISHER DOOR PULL
- SCREW DOOR PULL FINISHER
- DOOR ESCUTCHEON PLATE
- SCREW
- SOCKET, S/CURTAIN RF/LR
- PLATE, SIDE CURTAIN, RF/LR
- SOCKET, S/CURTAIN LF/RR
- PLATE, SIDE CURTAIN, LF/RR
- SCREW
- SCREW, SHEET METAL, NO 8 X 1
- S/CURTAIN SET, WEDGE, WHITE
- S/CURTAIN SET, BLACK, WEDGE
- S/CURTAIN SET, BLACK, DZUS
- S/CURTAIN SET, DZUS, WHITE
- SIDE CURTAIN WEDGES, ALUMINUM
- DZUS FASTNER, SIDECURTAIN
Doors TR4-4A
- DOOR ASSY, L/H
- DOOR ASSY, R/H
- DOOR ASSY, L/H
- DOOR ASSY, R/H
- DOOR SKIN, R/H
- DOOR SKIN, L/H
- DOOR HANDLE SET, REPLACEMENT
- DOOR HANDLE, L/H
- DOOR HANDLE ASSY, R/H
- FS SERIES KEY BLANK
- FP SERIES KEY BLANK
- FA SERIES KEY BLANK
- GASKET FRONT/SMALL
- GASKET, DOOR HANDLE
- SCREW, 10-32 X 1/2, PAN HEAD
- WASHER, LOCK, INT TOOTH, #10
- WASHER,FLAT, 3/16 ID, 3/4 OD
- SCREW, 10-32 X 1/2, PAN HEAD
- WASHER, LOCK, INT TOOTH, #10
- LINK ASSY
- LINK ASSY SPRNG CLIP
- SEAL, DOOR GLASS, OUTER, L/H
- SEAL, DOOR GLASS, OUTER, R/H
- CLIP
- SEAL, DOOR GLASS,INNER L/H
- SEAL, DOOR GLASS,INNER R/H
- CLIP, INNER DOOR GLASS SEAL
- DOOR RESTRAINT ASSY
- SCREW, 1/4 UNF X 5/8 IN
- WASHER CUPPED
- STRIKER, DOOR LOCK, L/H
- STRIKER, DOOR LOCK, R/H
- SCREW, 1/4 UNF X 1 IN, FH CSK
- WASHER CUPPED
- SHIM, STRIKER PLATE
- DOOR WINDOW GLASS
- GLAZING STRIP
- CHANNEL ASSY, L/H
- CHANNEL ASSY, R/H
- DOOR HINGE
- BOLT, 5/16 UNF X 3/4
- WASHER, LOCK, 5/16 IN
- WASHER, FLAT, 5/16 ID, 1 OD
- BOLT,HEX, 5/16 UNF X 5/8
- WASHER, LOCK, 5/16 IN
- DOOR CHECK, PAIR
- DOOR CHECK, PAIR
- CHECKSTRAP BOOT
- SCREW, 10-32 X 1/2, PAN HEAD
- WASHER,FLAT, 3/16 ID, 3/4 OD
- BOLT, HEX, 1/4 UNF X 1/2, G5
- WASHER, LOCK, INT TOOTH, 1/4
- WASHER
- CHECKSTRAP
- RIVET, DOOR CHECK STRAP
- CHECKSTRAP BOOT
- SCREW, #6, SELF TAPPING
- WASHER, FLAT, #6, ZINC
- CHECKSTRAP SPRINGCLIP
- DOOR TOP RAIL, L/H
- DOOR TOP RAIL, R/H
- CHANNEL, DOOR GLASS,FRONT, L/H
- CHANNEL, DOOR GLASS,FRONT, R/H
- CHANNEL, DOOR GLASS, REAR, L/H
- CHANNEL, DOOR GLASS, REAR, R/H
- FELT
- BOLT, 1/4 UNF X 3/4, POINTED
- WASHER, LOCK, INT TOOTH, 1/4
- WASHER, FLAT, 1/4 ID, 3/4 OD
- WASHER
- BOLT, 1/4 UNF X 3/4, POINTED
- WASHER, LOCK, INT TOOTH, 1/4
- WASHER, FLAT, 1/4 ID, 3/4 OD
- TIE ROD FOR DOOR, L/H
- TIE ROD FOR DOOR, R/H
- STOP BRKT FOR GLASS
- SCREW, 10-32 X 1/2, PAN HEAD
- WASHER, LOCK, #10, GR 5
- WASHER,FLAT, 3/16 ID, 3/4 OD
- PULL HANDLE
- SCREW
- SPIRE NUT
- REMOTE CONTROL, L/H
- REMOTE CONTROL, R/H
- SCREW, 10-32 X 1/2, PAN HEAD
- WASHER, LOCK, INT TOOTH, #10
- SPRING
- ESCUTCHEON
- DOOR OPENING HANDLE
- ROTARY LOCK, L/H
- ROTARY LOCK, R/H
- WASHER, FLAT, 1/4 ID, ZINC
- 454236-360-610
- REMOTE TO LOCK CLIP
- 454236-360-610
- SCREW, 10-32 X 1/2, PAN HEAD
- WASHER, LOCK, INT TOOTH, #10
- WINDOW WINDER ASSY, LH
- WINDOW WINDER ASSY, RH
- RETAINER
- WASHER, LEATHER
- SETSCREW, HEX, 1/4 UNF X 5/8
- WASHER, LOCK, 1/4 IN
- WASHER, FLAT, #12
- WASHER
- SPRING
- ESCUTCHEON
- HANDLE, WINDOW WINDER
- PIN, TO SECURE HANDLE
- 454236-360-610
- WASHER
- WASHER, DOUBLE COIL
- WASHER, LOCK, 5/16 IN
- NUT, JAM, 5/16 UNF, G5
- 454236-360-610
- BOLT, 1/4 UNF X 3/4, POINTED
- WASHER, FLAT, 1/4 ID, ZINC
- WASHER, FLAT, 1/4 ID, 3/4 OD
- WASHER, LOCK, 1/4 IN
- NUT, HEX, 3/8 UNF, G5, ZINC
- CAP,TRIM, UNFINISHED, PRIMED
- CAP, BLUE, FOR TRIM SCREW
- CAP, RED, FOR TRIM SCREW
- SCREW DOOR POCKET
- CLIP, DOOR POCKET CAP
- CLIP, DOOR PANEL
- MOQUETTE TRIM, BLACK, YARD
- MOQUETTE TRIM RED 1.YD
- MOQUETTE TRIM BLUE 1-YD
- DOOR SEAL BLK /YD.
- DOOR SEAL, RED
- DOOR SEAL TAN VELOUR/RUBBER
- RUBBER DOOR SEAL SOFTTOP
- RUBBER DOOR SEAL SURYTOP
- OUTER SEAL RETAINER
Front Body Fittings TR2-3B
- GRILLE, STAMPED
- GRILL
- SCREW
- SPIRE NUT
- 454236-360-610
- GRILLE
- SCREW, #8 X 5/8
- REVEAL MOULDING, UPPER
- REVEAL MOULDING, LOWER
- COVER CLIP, MOULDING JOINT
- STUD PLATE, REVEAL MOULDING
- NUT, HEX, 10-32, ZINC, 3/8 AF
- GRILLE
- SCREW, #8 X 5/8
- SPIRE NUT
- SPIRE NUT
- HOOD FASTENER ASSY (DZUS)
- FASTENER SPRING-BRKT
- BOLT, HEX, 1/4 UNF X 9/16
- WASHER, LOCK, 1/4 IN
- PACKING, BRACKET, 1/16IN
- PROP ROD/CATCH ASSY
- HOOK, BONNET CATCH
- PROP ROD STOP
- HOOD LIFT ASSEMBLY
- PAD, HOOD BUFFER
- HOOD HINGE SET, CHROME
- HOOD HINGE SET, CHROME
- NUT, HEX, 1/4 UNF, G5, ZINC
- NUT, 5/16 UNF, ZINC
- GASKET SET, ONE TRUNK HINGE
- VENT LID ASSY
- SCUTTLE VENT SPRNG
- SEAL, COWL VENT
- ESCUTCHEON, VENT PULL
- KNOB, VENT PULL
- ROD ASSY, VENT CONTROL
- GROMMET,1/2 OD, 1/8 ID
- COMMISSION PLATE
- COMMISSION PLATE
- COMMISSION PLATE
- COMMISSION PLATE
- RIVET, COMMISSION NO. PLATE
- SEALING RUBBER
- CLIP, DOOR SEAL
- FURFLEX, BLACK, YARD
- FURFLEX, RED, YARD
- FURFLEX, BLUE, YARD
- FURFLEX, TAN, YARD
- 454236-360-610
- 454236-360-610
- 454236-360-610
- PIPING, VINYL, 23 FEET
- PIPING, VINYL, 23 FEET
- BEADING, FRONT FENDER
- BEADING, REAR FENDER, LONG
- BEADING, REAR FENDER, SHORT
- MEDALLION, FRONT, RED-BLACK
- MEDALLION BLK/RED TR3
- MEDALLION BLK/RED
- MEDALLION, BLUE-WHITE
- SPEED NUT
- TRIUMPH LETTER SET
- KIT SPEED NUT
- LETTER SET,SMOOTH FACE,TRIUMPH
- CHROME START HANDLE GUIDE
- STAYROD, HANDCRANK
- BUMPER BAR, FRONT
- FACE BAR, FRONT BUMPER
- OVERRIDER, FRONT
- BOLT, OVERRIDER
- NUT, HEX, 3/8 UNF, G5, ZINC
- WASHER, LOCK, SQ CX, 3/8 IN
- WASHER, FLAT, 3/8 ID, ZINC
- OVERRIDER, FRONT
- TUBE SUPPORT, R/H
- TUBE SUPPORT , L/H
- BOLT, 3/8 UNF X 1
- BOLT, 3/8 UNF X 2
- OVERRIDER PACKING, 5 IN. STRIP
- BOLT, CARRIAGE, W/ NUT, BUMPER
- BUMPER PACKING
- WASHER, FLAT, 3/8 ID, ZINC
- WASHER, LOCK, SQ CX, 3/8 IN
- NUT, STD. HEX, 3/8 BSF, ZINC
- BRACKET, BUMPER
- BRACKET, BUMPER
- BRACKET, BUMPER
- BRACKET, BUMPER
- BRACKET, BUMPER
- BRACKET, BUMPER, R/H
- BRACKET, BUMPER
- BOLT, RADIATOR GUARD TO FRAME
- BOLT, 3/8 UNF X 3 1/4
- BOLT,BRACKET, BUMPER
- WASHER, FLAT, 3/8 ID, ZINC
- WASHER, LOCK, 3/8 STD G8
- NUT, HEX, 3/8 UNF, G5, ZINC
Front Body Fittings TR4-4A
- HOODLATCH ASSY
- HOODLATCH ASSY
- 454236-360-610
- SPRING, HOOD LATCH
- HOODLATCH ASSY
- CUP, HOOD LATCH
- PLATE HOOD FASTENER
- BOLT, HEX, 1/4 UNF X 1/2, G5
- WASHER, LOCK, 1/4 IN
- WASHER, FLAT, 1/4 ID, ZINC
- 454236-360-610
- SCREW, HEX HEAD, 3/16 UNF
- WASHER, LOCK, #10, GR 5
- WASHER,FLAT, 3/16 ID, 3/4 OD
- HOOD BADGE
- SPEED NUT
- BADGE, ROUND, TR WORLD
- RING, CHROME, HOOD BADGE
- SPEED NUT, FOR 3/32 PIN
- LETTER SET,SMOOTH FACE,TRIUMPH
- BLIND FIX KIT
- HOOD PROP ROD
- BRACKET, STAY-ROD
- BUFFER STAYROD BRKT
- NUT, NYLOC, 1/4 UNF
- SPRING WASHER, THACKERY
- WASHER, FLAT, 1/4 ID, 3/4 OD
- GRILLE ASSY
- GRILLE ASSY
- SCREW
- WASHER, FLAT, #8
- SPIRE NUT
- SPIRE NUT
- NUT, JAM, NYLOC, 1/4 UNF
- WASHER, FLAT, 3/16 ID, 5/8 OD
- SCREW
- WASHER, LOCK, #10, GR 5
- WASHER, FLAT, 3/16 ID, 5/8 OD
- CAPTIVE NUT
- BRACKET, BUMPER SUPPORT, R/H
- BRACKET, R/H BUMPER SUPT
- BRACKET, BUMPER SUPPORT, L/H
- BRACKET, L/H BUMPER SUPT
- SUPPORT BRACKET PLATE
- BOLT, 3/8 UNF X 3
- BOLT, WISHBONE ARM
- WASHER, FLAT, 3/8 ID, ZINC
- WASHER, LOCK, 3/8 STD G8
- NUT, HEX, 3/8 UNF, G5, ZINC
- BRACKET, FT. BUMPER
- BRACKET, FT. BUMPER
- BOLT, 3/8 UNF X 1 3/4
- BOLT, 3/8 UNF X 1-7/8
- WASHER, LOCK, SQ CX, 3/8 IN
- WASHER, FLAT, 3/8 ID
- BUMPER PACKING WASHER
- BOLT, 3/8 UNF X 1 1/4
- WASHER, LOCK, SQ CX, 3/8 IN
- WASHER, FLAT, 3/8 ID
- BOLT, CARRIAGE, W/ NUT, BUMPER
- WASHER, FLAT, 3/8 ID
- WASHER, LOCK, SQ CX, 3/8 IN
- NUT, HEX, 3/8 UNF, G5, ZINC
- TUBE SUPPORT, R/H
- TUBE SUPPORT, L/H
- BOLT, 5/16 UNF X 1, G5
- WASHER, FLAT, 5/16 ID,17 MM OD
- WASHER, LOCK, 5/16 IN
- NUT, 5/16 UNF, ZINC
- BOLT,HEX, 5/16 UNF X 5/8
- WASHER, FLAT, 5/16 ID,17 MM OD
- WASHER, FLAT, 5/16 ID,17 MM OD
- BUMPER, FRONT
- BUMPER BAR, FRONT
- OVERRIDER, FRONT
- OVERRIDER, L/H FRONT
- OVERRIDER, R/H FRONT
- PACKING SET
- HOOD CATCH PLATE
- SETSCREW, HEX, 1/4 UNF X 5/8
- BOLT, HEX, 1/4 UNF X 1/2, G5
- WASHER, LOCK, 1/4 IN
- WASHER, FLAT, 1/4 ID, ZINC
- CABLE, HOOD RELEASE
- CABLE, HOOD REL,OUTER, OE TYPE
- CABLE, HOOD RELEASE
- GROMMET,1/2 OD, 1/8 ID
- CLIP, HOOD RELEASE CABLE
- SCREW, HEX HEAD, 3/16 UNF
- RUBBER, HOOD SEALING
- BUFFER
- HOOD PIN
- NUT, JAM, 5/16 UNF, G5
- WASHER, FLAT, 5/16 ID, 7/8 OD
- BUFFER, HOOD
- SCREW, SELF TAPPING
- WASHER, CUP
- BEADING, FRONT FENDERS
- MOLDING, DOOR, L/H & R/H
- MOULDING, FRONT FENDER, L/H
- CLIP, W/RIVET, BODY MOULDING
- BARREL CLIP
- HOOD HINGE, L/H
- HOOD HINGE, R/H
- BOLT, 5/16 UNF X 1, G5
- WASHER, LOCK, 5/16 IN
- WASHER, FLAT, 5/16 ID,17 MM OD
- HUB CAP SET
- HUB CAP, CHROME
- MEDALLION, HUB CAP
- NUT, HEX, 10-32, ZINC, 3/8 AF
- WASHER, LOCK, #10, GR 5
- MEDALLION, HUB CAP
- MIRROR, RACING, CHROME, L & S
- MIRROR, RACING, CHROME, L & S
- MIRROR, CONVEX, R/H
- MIRROR, CONVEX, L/H
- MIRROR, FLAT, R/H
- MIRROR, FLAT, L/H
- PAD, FENDER MIRROR
- CHROME GUIDE
- GUIDE PLUG
- SCREW, 10-32 X 1/2, PAN HEAD
- WASHER,FLAT, 3/16 ID, 3/4 OD
- WASHER, LOCK, #10, GR 5
- NUT, HEX, 10-32, ZINC, 3/8 AF
- COMMISSION PLATE
- COMMISSION PLATE
- PLUG, JACK HOLE
- PLUG, 2-1/8 HOLE, TRANS COVER
- PLUG, BLANKING, 1 IN
- PLUG, BLANKING, 1 IN
- PLUG, BLANKING, 1 IN
- PLUG, BLANKING, 5/8 IN HOLE
- PLUG, BLANKING, 5/8 IN HOLE
- GROMMET,1/2 OD, 1/8 ID
- GROMMET,1/2 OD, 1/8 ID
- GROMMET,1/2 OD, 1/8 ID
- GROMMET,1/2 OD, 1/8 ID
- GROMMET, 1 1/4 HOLE, 3/8 ID
- GROMMET, 1 HOLE, 5/32 ID
- GROMMET, 1 HOLE, 5/32 ID
- GROMMET, 1 HOLE, 5/32 ID
- GROMMET, WIRE HARNESS
- GROMMET, 1 HOLE, 5/32 ID
- GROMMET, STEERING COLUMN
Rear Body Fittings TR2-TR3B
- GAS CAP
- GAS CAP, W/ INTEGRAL EXTENSION
- ESCUTCHEON, GAS CAP
- WASHER, FIBER, GAS CAP
- GROMMET, FILLER CAP
- EXTENSION, GAS CAP
- END PIECE,TONNEAU RAIL, CENTER
- END PIECE,TONNEAU RAIL, L/H
- END PIECE,TONNEAU RAIL, R/H
- 454236-360-610
- 454236-360-610
- CAPPING, QTR RAIL, F/GLASS,L/H
- CAPPING, QTR RAIL, F/GLASS,R/H
- 454236-360-610
- 454236-360-610
- FURFLEX, BLACK, YARD
- FURFLEX, RED, YARD
- FURFLEX, BLUE, YARD
- STRIKER PLATE, DOOR LATCH
- PACKING STRIKER PLATE
- 454236-360-610
- SILL FINISHER SET
- 454236-360-610
- SETSCREW, HEX, 1/4 UNF X 5/8
- WASHER, FLAT, 1/4 ID, 3/4 OD
- GEARSHIFT BOOT
- PLUG, 2-1/8 HOLE, TRANS COVER
- PLUG, 2-1/8 HOLE, TRANS COVER
- 454236-360-610
- GROMMET, 1 HOLE, 5/32 ID
- 454236-360-610
- PLUG, JACK HOLE
- STONE GUARD SET
- STONE GUARD, REAR, L/H
- STONE GUARD, REAR , R/H
- STONE GUARD, BODY,SMALL, L/H
- STONE GUARD, BODY, R/H
- HUB CAP SET
- HUB CAP, CHROME
- MEDALLION, HUB CAP
- NUT, HEX, 10-32, ZINC, 3/8 AF
- WASHER, LOCK, #10, GR 5
- TRUNK HINGE SET, CHROME
- TRUNK HINGE SET, CHROME
- NUT, HEX, 1/4 UNF, G5, ZINC
- NUT, 5/16 UNF, ZINC
- GASKET SET, ONE TRUNK HINGE
- ESCUTCHEON ASSY, FIGLEAF
- SCREW, ESCUTCHEON MOUNT
- TRUNK LOCK
- HANDLE W/LOCK
- SCREW HANDLE MTG
- GASKET, DOOR & TRUNK HANDLE
- FS SERIES KEY BLANK
- FP SERIES KEY BLANK
- FA SERIES KEY BLANK
- BUDGET LOCK (R-L VARIES)
- BUDGET LOCK (R-L VARIES)
- PROP ROD STOP
- COTTER PIN, 1/8 X 2 1/4
- PROP ROD, TRUNK LID
- SEAL, TRUNK , RUBBER
- SEAL, TRUNK, RUBBER
- DRAIN TUBE
- PANELBOARD, GAS TANK
- PIPING, VINYL, 23 FEET
- BEADING, REAR FENDER, LONG
- BEADING, REAR FENDER, SHORT
- BEADING, FRONT FENDER
- NAMEPLATE, TRIUMPH
- SPEED NUT, 1/8 IN STUD
- STRAP, SPARE TIRE AND TOOL
- 454236-360-610
- SPARE LID RUBBER
- BUDGET LOCK (R-L VARIES)
- BUDGET LOCK (R-L VARIES)
- ESCUTCHEON ASSY ROUND
- SCREW, ESCUTCHEON MOUNT
- OVERRIDER, REAR
- BOLT, CARRIAGE, W/ NUT, BUMPER
- WASHER, FLAT, 3/8 ID
- WASHER, LOCK, 3/8 STD G8
- NUT, HEX, 3/8 UNF, G5, ZINC
- OVERRIDER MOUNT BRACKET
- BOLT, 3/8 UNF X 5 1/2
- WASHER, FLAT, 3/8 ID
- REAR DISTANCE TUBE
- WASHER, LOCK, 3/8 STD G8
- NUT, HEX, 3/8 UNF, G5, ZINC
- BOLT, 3/8 UNF X 7/8
- WASHER, FLAT, 3/8 ID
- WASHER, LOCK, 3/8 STD G8
- NUT, HEX, 3/8 UNF, G5, ZINC
Rear Body Fittings TR4-4A
- TRUNK LID SHELL
- TRUNK REINFORCEMENT
- TRUNK REINFORCEMENT
- BOLT, HEX, 1/4 UNF X 1
- WASHER, LOCK, 1/4 IN
- WASHER, FLAT, #12
- NUT, HEX, 1/4 UNF, G5, ZINC
- TRUNK HINGE SET
- GASKET, HINGE TO DECK
- GASKET, HINGE TO LID
- NUT, NYLOC, 5/16 UNF
- WASHER, FLAT, 5/16 ID, 1.25 OD
- NUT, HEX, 1/4 UNF, G5, ZINC
- WASHER, LOCK, 1/4 IN
- WASHER, FENDER MOUNTING, 1/4
- WASHER, FLAT, 1/4 ID, 3/4 OD
- TRUNK LID STAY
- PIVOT PIN
- WASHER, FLAT, 1/4 ID, 3/4 OD
- 454236-360-610
- PROP ROD STOP
- COTTER PIN, 1/8 X 2 1/4
- STAY, TRUNK LID
- BOLT, SHOULDERED
- WASHER, FLAT, 1/4 ID, ZINC
- WASHER, DOUBLE COIL
- NUT, NYLOC, 1/4 UNF
- BOLT, SHOULDERED
- LETTER SET,SMOOTH FACE,TRIUMPH
- MEDALLION, TRUNK, W/TR4
- MEDALLION, TRUNK, A
- MEDALLION, W/TR4A IRS
- BLIND FIX KIT
- BLIND FIX, OD 0.187
- HANDLE, TRUNK LID
- BARREL KEYS TRUNK
- FS SERIES KEY BLANK
- FP SERIES KEY BLANK
- FA SERIES KEY BLANK
- GASKET, TRUNK HANDLE
- TRUNK LOCK
- SCREW, 10-32 X 1/2, PAN HEAD
- WASHER, LOCK, #10, GR 5
- WASHER,FLAT, 3/16 ID, 3/4 OD
- NUT, HEX, 10-32, ZINC, 3/8 AF
- SEAL, TRUNK
- CAPPING, REAR DECK, R/H
- CAPPING, REAR DECK, CENTER
- CAPPING, REAR DECK, L/H
- STUD, LIFT-THE_DOT, LONG
- STUD, LIFT-THE-DOT,W/FLANGE
- SCREW
- FINISHER, B-POST, R/H
- FINISHER, B- POST, L/H
- SCREW, PANELS
- GAS CAP, W/ INTEGRAL EXTENSION
- GROMMET, FILLER CAP
- BEADING, UPPER REAR FENDER
- FENDER BEAD, L/H LOWER, REAR
- FENDER BEAD, R/H LOWER, REAR
- CASING BOARD
- SCREW, 10 X 1/2 IN, POZI
- WASHER, FLAT, 3/16 ID, 5/8 OD
- SPIRE CLIP
- SPARE TIRE COVER
- SNAP ASSY, FEMALE
- SNAP, MALE
- RIVET, 1/8 DIA
- GROMMET, 1 HOLE, 5/32 ID
- TRUNK CATCH PLATE
- SCREW, 10-32 X 1/2, PAN HEAD
- WASHER,FLAT, 3/16 ID, 3/4 OD
- WASHER, LOCK, #10, GR 5
- NUT, HEX, 10-32, 5/16 AF, G5
- GROMMET, 1 HOLE, 5/32 ID
- PLUG, BLANKING, 1 IN
- PLUG, BLANKING, 5/8 IN HOLE
- GROMMET, GAS TANK DRAIN
- WINGNUT, SPARE TIRE
- DISC, SPARE WHEEL CLAMP
- HOOK BOLT, SPARE WHEEL
- STRAP TOOL ROLL
- PLATE, STRAP RETAINER
- SCREW, 10-32 X 1/2, PAN HEAD
- BUMPER BAR, REAR
- OVERRIDER, R/H REAR
- OVERRIDER, L/H REAR
- PACKING SET
- BRACKET, REAR BUMPER, INNER
- BRACKET, REAR BUMPER, INNER
- BRACKET, REAR BUMPER, OUTER
- BRACKET, REAR BUMPER, OUTER
- BOLT, 3/8 UNF X 3 1/4
- WASHER, FLAT, 3/8 ID
- WASHER, LOCK, 3/8 STD G8
- NUT, HEX, 3/8 UNF, G5, ZINC
- BOLT, 3/8 UNF X 1 1/4
- WASHER, LOCK, 3/8 STD G8
- WASHER, FLAT, 3/8 ID
- BOLT, 3/8 UNF X 1 3/4
- WASHER, LOCK, 3/8 STD G8
- WASHER, FLAT, 3/8 ID
- BUMPER PACKING WASHER
- BOLT, CARRIAGE, W/ NUT, BUMPER
- WASHER, FLAT, 3/8 ID
- WASHER, LOCK, 3/8 STD G8
- NUT, HEX, 3/8 UNF, G5, ZINC
- SUPPORT, L/H REAR OVERRIDER
- SUPPORT, R/H REAR OVERRIDER
- BOLT,HEX, 5/16 UNF X 5/8
- WASHER, LOCK, 5/16 IN
- WASHER, FLAT, 5/16 ID,17 MM OD
- BOLT, 3/8 UNF X 3/4
- WASHER, FLAT, 3/8 ID
- WASHER, LOCK, 3/8 STD G8
- NUT, HEX, 3/8 UNF, G5, ZINC
- OUTRIGGER, R/H BUMPER
- OUTRIGGER, L/H BUMPER
- OUTRIGGER, R/H BUMPER
- OUTRIGGER, L/H BUMPER
- BOLT, 3/8 UNF X 5/8
- WASHER, LOCK, SQ CX, 3/8 IN
- WASHER, FLAT, 3/8 ID
- STUD, BUMPER
- NUT, HEX, 3/8 UNF, G5, ZINC
- WASHER, LOCK, 3/8 STD G8
- WASHER, FLAT, 3/8 ID
- BOLT, 3/8 UNF X 2 1/4
- WASHER, LOCK, SQ CX, 3/8 IN
- WASHER, FLAT, 3/8 ID
- SPACER, REAR BUMPER
- WASHER, FLAT, 3/8 ID
- CAPTIVE NUT
Grommets & Blanking Plugs
- GROMMET,1/2 OD, 1/8 ID
- PLUG, BLANKING, 1/2 IN HOLE
- GROMMET, 5/8 OD, 1/4 ID
- PLUG, BLANKING, 5/8 IN HOLE
- PLUG, BLANKING, 3/8 IN HOLE
- PLUG, BLANKING, 7/16 HOLE
- PLUG, BLANKING, 1/2 IN HOLE
- PLUG, BLANKING, 1 IN HOLE
- PLUG, BLANKING, 13/16 IN HOLE
- PLUG, BLANKING, 1 1/2 IN HOLE
- GROMMET, 1 HOLE, 5/32 ID
- GROMMET, 1 OD, 1/4 ID
- GROMMET, 1 1/4 HOLE, 3/8 ID
- GROMMET,1/2 OD, 1/8 ID
- BLANKING RUBBER
- PAD, BULKHEAD FITTING
- SEALING PAD
- GROMMET, 1 HOLE, 5/32 ID
- GROMMET, 1 HOLE, 5/32 ID
- GROMMET, STEERING COLUMN
- GROMMET, WIRE HARNESS
- PLUG, BLANKING, 3/8 IN HOLE
- PLUG, BLANKING, 7/16 HOLE
- PLUG, BLANKING, 1/2 IN HOLE
- PLUG, BLANKING, 5/8 IN HOLE
- PLUG, BLANKING, 13/16 IN HOLE
- PLUG, BLANKING, 1 IN
- PLUG, BLANKING, 1 1/2 IN HOLE
- GROMMET,1/2 OD, 1/8 ID
- GROMMET
- GROMMET, 1 HOLE, 5/32 ID
- GROMMET, 1 1/4 HOLE, 3/8 ID
- GROMMET, WIRE HARNESS
Interior Hardware
- TENAX FASTENER ASSEMBLY
- FASTENER, TENAX, W/RING
- STUD, TENAX, 2BA X 3/8
- NUT, HEX, 10-32, 5/16 AF, G5
- STUD, TENAX, ON W/S FRAME - TR2 FROM TS3514 THRU TR3B
- WASHER SET
- STUD, LIFT-THE-DOT, W/NUT
- STUD, LIFT-THE-DOT, SCREW TYPE
- STUD, LIFT-THE-DOT,W/FLANGE
- STUD, LIFT-THE_DOT, LONG
- FASTENER, LIFT-THE-DOT
- SNAP SET, VELTEX, CARPET, 3 PC
- CLIP, DOOR PANEL
- SCREW, CHROME
- SCREW, CHROME
- SCREW, CHROME
- SCREW
- SCREW
- SCREW QTR BOARDS
- SCREW, PANELS
- SCREW, PANELS
- SCREW DOOR POCKET
- WASHER
- WASHER
- WASHER
- WASHER
- WASHER, CUP
- WASHER, CUP
- WASHER, CUP
- WASHER, CUP
- SNAP, MALE, WITH SCREW
- SNAP, MALE
- SNAP ASSY, FEMALE
Windshield TR2-3B
- WINDSHIELD GLASS - TR2, 3, 3A, 3B
- GLAZING STRIP, WINDSHIELD GLAS
- BRACKET SET, W/S CORNER
- SEAL-W/S FRAME TO TOP
- 454236-360-610
- STUD, TENAX, ON W/S FRAME - TR2 FROM TS3514 THRU TR3B
- 454236-360-610
- FASTENER, TENAX, W/RING
- SUPPORT, W/S CENTER, W/BUFFER
- BUFFER, W/S CENTER BRACKET
- SEAL, BOTTOM W/SHIELD TO COWL
- BRACKET, W/S, SIDE, L/H
- BRACKET, W/S, SIDE, R/H
- 454236-360-610
- 454236-360-610
- PLATE CHROMED WINDSHIELD
- SCREW, 2BA X 7/8, OVAL HEAD
- SCREW, W/S LONG
- DZUS FASTENER
- WASHER, DZUS FASTNER
- BOLT
- WINDSHIELD BRACKET
- WINDSHIELD BRACKET
- SCREW
- CORNER FINISHER, W/S
- SCREW
- MIRROR, DASH
- MIRROR, DASH
- SCREW, MIRROR
Windshield TR4-4A
- WINDSHIELD FRAME
- WINDSHIELD TOP BRACKET
- SNAP, MALE, WITH SCREW
- SEAL, WINDSHIELD FRAME
- BOLT, W/S FRAME TO BODY,CHROME
- WASHER, FLAT, 5/16 ID, 7/8 OD
- COVER,ATTACHMENT PLATE,POLISHD
- SUPPORT BRACKET, R/H
- SUPPORT BRACKET, L/H
- BOLT, HEX, 1/4 UNF X 1
- WASHER, LOCK, 1/4 IN
- WASHER, FENDER MOUNTING, 1/4
- NUT, NYLOC, 5/16 UNF
- WASHER, FLAT, 5/16 ID, 7/8 OD
- PACKING, W/S MOUNTING BRACKET
- BOLT, HEX, 1/4 UNF X 1/2, G5
- WASHER, LOCK, 1/4 IN
- WASHER, FENDER MOUNTING, 1/4
- 454236-360-610
- MOULDING, WINDSHIELD
- COVER, FOR JOINT IN FINISHER
- GLAZING RUBBER, WINDSHIELD
- WINDSHIELD GLASS
- WINDSHIELD GLASS, TINTED
- WINDSHIELD CAPPING
- WINDSHIELD CAPPING
- WINDSHIELD CAPPING
- RIVET, 1/8 DIA
- 454236-360-610
- PLUG, BLANKING, 5/8 IN HOLE
- MOUNT, SUNVISOR, CENTER
- MOUNT, SUNVISOR, CENTER
- MOUNT, SUNVISOR, OUTER
- MOUNT, SUNVISOR, OUTER
- SUNVISOR, LH OR RH
- SUNVISOR, L/H
- SUNVISOR, R/H
- SCREW,DASH, CHROME
- CLIP
- MIRROR, INTERIOR
- MIRROR, INTERIOR
- SCREW
- CLIP
- LATCH, HEADER RAIL
- SOCKET
- WASHER, LOCK, #10, GR 5
- SCREW, 10-32 X 5/8, OVAL HEAD
- SEAL, HEADER RAIL
We at Little British Car Co and Vintage Motors are dedicated to providing excellent customer service with a "Personal Touch" and quality classic car parts and accessories always at a "substantially lower" price.
|
