LBCarCo stock the following parts for the TR6 GEARBOX/OVERDRIVE. Click on the part for pricing and ordering information.
External Gearbox
- GASKET SET, NON O/D
- GASKET SET, GEARBOX W/ OD
- KNOB, GEARSHIFT, OE STYLE
- NUT, JAM, 5/16 UNC
- BOLT LOCATING
- NUT, JAM, 5/16 UNC
- PLUNGER IN LEVER TR
- SPRING, FOR LEVER
- GAITER, SHIFTBOOT BLACK VINYL
- GAITER, SHIFTBOOT BLACK LEATH
- SHIFTBOOT, UPPER
- SHIFT BOOT, LOWER
- SCREW
- FORK, 1ST - 2ND SELECTOR
- BALL, 3/8 INCH
- SPRING, GEAR SELECTOR
- PLUG BUCKET
- BALL, 3/8 INCH
- REV SHAFT PLUNGER TR
- BALL, 3/8 INCH
- SPRING, GEAR SELECTOR
- FORK, 3RD - 4TH SELECTOR
- SLEEVE, 3RD AND 4TH
- REV SHAFT PLUNGER TR
- PLUNGER REVERSE SEL
- SPRING
- SLEEVE,REVERSE
- BOLT, HEX, 1/4 UNF X 1/2, G5
- O-RING
- OIL SEAL
- OIL SEAL
- SPEEDO DRIVE GEAR
- SPEEDO DRIVE GEAR
- SPEEDO DRIVE HOUSING
- OIL SEAL, SPEEDO PINION
- O-RING
- GASKET, REAR GRARBOX
- PLUG, OIL FILL/ DRAIN/BLANKING
- PLUG, OIL FILL/ DRAIN/BLANKING
- BUSH, CLUTCH SHAFT
- SEAL, GBOX/STEERING BOX
- FRONT COVER
- GASKET, FRONT COVER
- COUNTERSHAFT COVER
- GASKET, LAYSHAFT END COVER
- GASKET, TOP COVER
- CORE PLUG
- SWITCH, GEARBOX/OD,AFTERMARKET
- PLUG, TRANS
- CORE PLUG
- PLUG, THREADED, BLANKING
- WASHER, COPPER
- KIT, GEARBOX COVER FITTING
- BOLT, HEX, 1/4 UNF X 1/2, G5
- WASHER, FLAT, 1/4 ID, 3/4 OD
- PLATE, UNDER GBX COVER BOLT
- NUT & RETAINER
Internal Gearbox
- SHAFT BRG WASHER
- BEARING
- CIRCLIP, MAINSHAFT BEARING
- SHAFT, OIL THROWER
- INPUT SHAFT
- BEARING, ROLLER
- BEARING INPUT SHAFT
- MAINSHAFT
- MAINSHAFT
- MAINSHAFT, O/D TRANS
- BEARING
- CIRCLIP, MAINSHAFT BEARING
- BEARING
- REAR MAINSHAFT FLANGE
- WASHER, FLAT, 3/4 ID
- NUT
- NUT, SELF LOCKING
- 1ST GEAR & BRG WASHER
- FIRST GEAR
- 1ST GEAR FITTED
- BUSH, GEARBOX, BRASS
- BUSHING, GEARBOX, STEEL
- SPACER WASHER-118
- SPACER WASHER .121
- SPACER WASHER .124
- SPACER WASHER .127
- WASHER .132 TRANS
- SYNCHRO RING
- SYNCHRO HUB ASSY 1-2ND
- SYNCHRO HUB ASS,Y 1ST&2ND
- BALL, SYNCHRO HUB
- SPRING, SYNCHRO HUB (FOR BALL)
- SPRING, SYNCHRO HUB
- SPACER WASHER-118
- SPACER WASHER .121
- SPACER WASHER .124
- SPACER WASHER .127
- WASHER .132 TRANS
- ADJUST WASHER .197 TRANS
- ADJUSTING WASHER 205/203
- BUSH, SECOND GEAR
- BUSH, 2ND GEAR, STEEL REPL
- STEEL BUSH FOR 2ND GEAR
- THIRD GEAR
- 3RD GEAR
- BUSH, GEARBOX, BRASS
- BUSHING, GEARBOX, STEEL
- WASHER, 3RD GEAR
- CIRCLIP, 3RD GEAR TO SHAFT
- THRUST WASHER, FRONT
- CIRCLIP, FOR OPEN CAGE BEARING
- BEARING, NEEDLE, IN SHELL
- BEARING
- WASHER, BACKING
- GEAR, CONSTANT MESH
- DISTANCE PIECE, GEARBOX
- 2ND LAYGEAR
- 2ND COUNTER GEAR MID
- 3RD LAYGEAR
- LAYGEAR
- COUNTER GEAR (LATE)
- THRUST WASHER, REAR
- COUNTERSHAFT (LAYSHAFT)
- LOCK PLATE
- SCREW, WEDGELOCK
- REVERSE SPINDLE
Gearbox and Overdrive Electrical
- RELAY, SPADE TERMINALS
- SWITCH, GEARBOX/OD,AFTERMARKET
- SWITCH, GEARBOX/OD,AFTERMARKET
- WASHER, 3/8 ID
- SWITCH, OVERDRIVE
- ESCUTCHEON O/D SW
- WIRING (BODY) A-TYPE O.D.
- HARNESS, ON GBX, J-TYPE OD
- HARNESS, ON BODY, J-TYPE OD
- WIRING-REV SWITCH
- BEZEL, SWITCH
- CONNECTOR SLEEVE, WIRE, SINGLE
Gearbox Mounts
- MOUNT, TRANSMISSION
- X-MEMBER TRANS MOUNT
- NUT, 7/16 UNF, G5, PLAIN
- WASHER, LOCK, 7/16
- MOUNT, TRANSMISSION
- NUT, 5/16 UNF, ZINC
- WASHER, LOCK, 5/16 IN
- BOLT, 3/8 UNF X 1
- NUT, HEX, 3/8 UNF, G5, ZINC
- WASHER, LOCK, 3/8 STD G8
A-Type Overdrive
- GASKET, REAR GRARBOX
- GEARBOX ADAPT PLATE
- GASKET, ADAPTOR TO OD
- OIL PUMP CAM
- PLUNGER, OIL PUMP
- SPRING, O/D OIL PUMP PLUNGER
- BODY, OVERDRIVE OIL PUMP
- FILTER, A-TYPE OD
- MAGNET, O/D, SET OF 3
- WASHER, DRAIN PLUG
- PLUG, OIL DRAIN
- NUT, HEX, 1/4 UNF, G5, ZINC
- OPERATING PISTON, W/ O-RING
- O-RING
- VALVE PLUG
- WASHER, COPPER, 3/4 OD, 1/2 ID
- SPRING OD VALVES
- PLUNGER, OVERDRIVE
- BALL, 5/16 IN DIA
- OPERATING VALVE
- CAM, OPERATING VALVE
- BALL, SYNCHRO HUB
- PLUNGER, OVERDRIVE
- SPRING OD VALVES
- WASHER, COPPER, 3/4 OD, 1/2 ID
- VALVE PLUG
- ACCUMULATOR HOUSING
- O-RING FOR HOUSING
- PISTON W/RINGS
- PISTON RING SET, A-TYPE OD
- GASKET, SOLENOID BRKT TO CASE
- BRACKET, O/D SOLONOID
- O RING
- COLLAR
- LEVER, SOLENOID
- SOLENOID, OVERDRIVE
- SCREW, HEX HEAD, 3/16 UNF
- MAINSHAFT
- MAINSHAFT, O/D TRANS
- SPRING SET
- BRAKE RING A-TYPE OD
- THRUST WASHER, A-TYPE OD
- WASHER, ADJUSTING, .113-114
- WASHER, ADJUSTING, .107-108
- WASHER, ADJUSTING, .101-102
- WASHER, ADJUSTING, .095-096
- WASHER, ADJUSTING, .089-090
- WASHER, ADJUSTING, .083-084
- WASHER, ADJUSTING, .077-078
- CIRCLIP, THRUST RING ASSY, OD
- CLUTCH BALL BEARING
- THRUST WASHER
- BEARING, O/D PLANET GEARS
- FREE-WHEEL ASSEMBLY
- O/D ROLLER SET
- SPRING FREEWHL ASSY
- THRUST WASHER, OVERDRIVE
- BEARING
- BEARING
- WASHER,ADJUSTING, 0.146 IN
- WASHER,ADJUSTING, 0.151 IN
- WASHER,ADJUSTING, 0.161 IN
- WASHER, ADJUSTING, 0.166 IN
- OIL SEAL
- REAR MAINSHAFT FLANGE
- WASHER, FLAT, 3/4 ID
- NUT
- COTTER PIN, 1/8 X 1 1/8
- ANGLE DRIVE, SPEDOMETER
- SPEEDO DRIVE GEAR
- SPEEDO DRIVE HOUSING
- OIL SEAL, SPEEDO PINION
- O-RING
J-Type Overdrive
We at Little British Car Co and Vintage Motors are dedicated to providing excellent customer service with a "Personal Touch" and quality classic car parts and accessories always at a "substantially lower" price.
|
